Sidescreen With Standard Windows - Siemens SINUMERIK 840D sl Operating Manual

Widescreen format multi-touch panels (840D sl only)

19.1 Sidescreen with standard windows

19.1 Sidescreen with standard windows
If the sidescreen has been configured, an additional navigation bar will be shown on the left-
hand side of the operating interface. You can change the operating area directly, as well as
show and hide the sidescreen, using this navigation bar.
Note
It is only possible to configure a sidescreen using the 2nd generation SINUMERIK Operate user
interface.
1
2
①
②
Figure 19-1
Opening the sidescreen
The sidescreen is shown by tapping on the arrow.
Tapping on the title bar will open the corresponding window.
788
Navigation bar for switching between the operating areas
In addition, the following windows can be opened directly:
- Tool list
- Work offset
Arrow key for showing/hiding the sidescreen
Navigation bar for sidescreen
Operating Manual, 05/2017, A5E40868956
Milling