Working with Manual Machine
16.7 More complex machining
Drilling a position pattern
You can drill a position pattern:
● First select the desired function (e.g. "Centering") via the softkey in "Drilling".
● Select the appropriate tool, enter the desired values in the parameter screen and press the
"Accept" softkey to confirm the technology block.
The input screen is closed and the line with the technology data is displayed in the main
screen.
● Press the "Positions" softkey and select the desired position pattern (e.g. any positions) via
softkey, enter the desired values in the parameter screen form press the "Accept" softkey.
The input screen is closed and the technology and positioning blocks are displayed in
brackets.
Swiveling
Manual swivel is available for the setup, measuring and machining of workpieces with inclined,
swiveled surfaces (see Section "Swiveling (Page 142)").
Approach and retraction
When machining the workpiece, you traverse from the current position to the machining start
point. After the machining process, the tool is returned along a direct path to the starting point.
16.7.1
Drilling with Manual Machine
Functions (cycles)
The same range of technological functions (cycles) is available as in automatic mode for drilling
on the face or peripheral surface of a workpiece:
762
⇒
⇒
⇒
⇒
Operating Manual, 05/2017, A5E40868956
Milling