Siemens SINUMERIK 840D sl Operating Manual page 312

Creating a ShopMill program
9.18 Example, standard machining
8. Drilling/centering
9. Drilling/reaming
312
1. Press the "Drilling" and "Centering" softkeys.
The "Centering" input window opens.
2. Enter the following technology parameters:
T Center‐
ing_tool_10mm
3. Enter the following parameters:
Diameter/tip
∅
DT
4. Press the "Accept" softkey.
1. Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2. Enter the following technology parameters:
T DRILL10
3. Enter the following parameters:
Diameter/tip
Z1
Predrilling
Through drilling
DT
4. Press the "Accept" softkey.
D1 F 1000 mm/min
Diameter
5
0.6 s
D1 F 500 mm/min
Tip
-25abs
No
No
0
Operating Manual, 05/2017, A5E40868956
S 12000 rev/min
S 1600 rev/min
Milling