Siemens SINUMERIK 840D sl Operating Manual page 518

Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Parameter
TC
Retraction
(for ShopMill program)
ZR
(for ShopMill program)
Align tool through beta and gamma angles
β
(for ShopMill program)
γ
(for ShopMill program)
Directly position rotary axes
B1
(for ShopMill program)
C1
(for ShopMill program)
518
Description
Name of the swivel data set
Note: The selection box only appears if more than one swivel data set has been set
up.
● No
The axis is not retracted before swiveling
● Z
Retraction in the direction of machine axis Z
● Z,X,Y
Move machining axes to retraction position before swiveling
● Tool direction, max.
Maximum retraction (up to the software end position) in the tool direction
● Tool direction, inc.
Incremental retraction (specified retraction distance, up to the software end
position) in the tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
Retraction path - only for incremental retraction in
Align tool with swivel axes
● Input value
The required angle can be freely entered
● β = 0°
● β = 90°
● 0°
● 180°
● The required angle can be freely entered
Directly align the tool with the swiveling axes:
The required angle can be freely entered
The required angle can be freely entered
Unit
mm
Degrees
Degrees
Degrees
Degrees
Operating Manual, 05/2017, A5E40868956
Milling