Creating Screenshots - Siemens SINUMERIK 840D sl Operating Manual

15.5

Creating screenshots

You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Copy file
Note
You can also copy the screenshots using "WinSCP" to a Windows PC
(for 840D sl).
Milling
Operating Manual, 05/2017, A5E40868956
5. Press the "Number" softkey if you wish to sort the alarm list or the list with
messages according to numbers.
6. Press the "Ascending" softkey if you wish to display the list in an ascend‐
ing order.
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system are in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999.png". You can create up to 9,999
screenshots.
1. Select the "Startup" operating area.
2. Press the "System data" softkey.
3. Open the folder specified above, and select the required screenshots.
4. Press the "Copy" softkey.
- OR -
Press the "Cut" softkey.
5. Open the required archive directory, e.g. on a USB flash drive and press
the "Paste" softkey.
Alarm, error, and system messages
15.5 Creating screenshots
739