Siemens SINUMERIK 840D sl Operating Manual page 802

Ctrl-Energy
20.3 Ctrl-E profiles
802
5. Position the cursor on the required energy-saving profile and press the
"Disable profile" softkey if you wish to disable this state.
The profile is inhibited and does not become active. The energy-saving
profile is grayed-out and displayed without any time information.
The labeling of the "Disable profile" softkey changes to "Enable profile".
Press the "Enable profile" softkey in order to withdraw the energy-saving
profile disable.
5. Press the "Disable all" softkey in order to disable all states.
All the profiles are disabled and cannot become active.
The labeling of the "Disable all" softkey changes to "Enable all".
6. Press the "Enable all" softkey to withdraw the disable for all profiles.
Operating Manual, 05/2017, A5E40868956
Milling