Siemens SINUMERIK 840D sl Operating Manual page 210

Machining the workpiece
6.12 Display and edit user variables
Procedure
Activating user variables
210
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
3. In the data tree, select the "NC data" folder and then open the "Definitions"
folder.
4. Select the file you want to edit.
5. Double-click the file.
- OR -
Press the "Open" softkey.
- OR -
Press the <INPUT> key.
- OR -
Press the <Cursor right> key.
The selected file is opened in the editor and can be edited there.
6. Define the desired user variable.
7. Press the "Exit" softkey to close the editor.
1. Press the "Activate" softkey.
A prompt is displayed.
2. Select whether the current values in the definition files should be retained
- OR -
Select whether the current values in the definition files should be deleted.
This will overwrite the definition files with the initial values.
3. Press the "OK" softkey to continue the process.
Operating Manual, 05/2017, A5E40868956
Milling