Circular Milling - Siemens SINUMERIK 840D sl Operating Manual

Working with Manual Machine
16.6 Simple workpiece machining
Parameter
F
X
Z
Y
B
X
α
Z
α
16.6.3.2

Circular milling

You can use this function for a simple circular machining.
Procedure
Parameter
Parameter
F
Circle input
760
Description
Feedrate
Straight all axes
Target position in the X direction (abs or inc)
Target position in the Z direction (abs or inc)
Target position in the Y direction (abs or inc)
Target position of the B axis (abs or inc)
Straight X α
Target position in the X direction (abs or inc)
Angle of the straight line to the X axis
Straight Z α
Target position in the Z direction (abs or inc)
Angle of the straight line to the Z axis
1. "Manual Machine" is active.
2. Press the "Straight circle" softkey.
3. Press the "Circle" softkey.
4. Specify the desired value for the feedrate F.
5. Select the desired circle input (e.g. "End point + radius") and the direction
of rotation.
6. Enter the target position as well as the circle center point or radius.
Using the "Graphic view" softkey, you can toggle between the help screen
and the graphic view in the screen.
Description
Feedrate
● End point + center point
● End point + radius
Unit
mm/min
mm/rev
mm
mm
mm
mm
mm
Degrees
mm
Degrees
Operating Manual, 05/2017, A5E40868956
Unit
mm/min
mm/rev
mm
Milling