Siemens SINUMERIK 840D sl Operating Manual page 187

Setting
Saving machining times Specifies how the machining times determined are processed.
Display cycles as ma‐
chining step
Highlight selected G
code commands
Font size
Note
All entries that you make here are effective immediately.
Requirement
You have opened a program in the editor.
Milling
Operating Manual, 05/2017, A5E40868956
Meaning
● Yes
A subdirectory with the name "GEN_DATA.WPD" is created in the
directory of the part program. There, the machining times determined are
saved in an ini file together with the name of the program. The machining
times are displayed again when the program or job list are reloaded.
● No
The machining times that have been determined are only displayed in the
editor.
● Yes: The cycle calls in the G code programs are displayed as plain text.
● No: The cycle calls in the G code programs are displayed in the NC syntax.
Defines the display of G code commands.
● No
All G code commands are displayed in the standard color.
● Yes
Selected G code commands or keywords are highlighted in color. Define
the rules for the color assignment in the sleditorwidget.ini configuration
file.
Note: Please observe the information provided by the machine
manufacturer.
Note
This setting also has an effect on the current block display.
Defines the font size for the editor and the display of the program sequence.
● auto
If you open a second program, then the smaller font size is automatically
used.
● normal (16) - character height in pixels
Standard font size that is displayed with the appropriate screen
resolution.
● small (14) - character height in pixels
More content is displayed in the editor.
Note
This setting also has an effect on the current block display.
Machining the workpiece
6.10 Editing a program
187