Activating And Deactivating A Device - Siemens SINUMERIK 840D sl Operating Manual

Easy Extend (828D only)

22.3 Activating and deactivating a device

Procedure
22.3 Activating and deactivating a device
Status
Procedure
812
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
A list of the connected devices is displayed.
3. Press the "Enable function" softkey.
The "Enabling of the Devices Option" window opens.
4. Enter the option code and press the "OK" softkey.
A tick appears in the appropriate checkbox in the "Function" column and
the function is enabled.
Meaning
Device activated
System waiting for PLC checkback signal
Device faulty
Interface error in the communication module
1. Easy Extend is opened.
2 You can select the desired device in the list with the <Cursor down> or
<Cursor up> keys.
3. Position the cursor on the device option for which the function has been
unlocked and press the "Activate" softkey.
The device is marked as activated and you can now use it.
4. Select the desired activated device and press the "Deactivate" softkey to
switch the device off again.
Operating Manual, 05/2017, A5E40868956
Milling