Siemens SINUMERIK 840D sl Operating Manual page 308

Creating a ShopMill program
9.18 Example, standard machining
308
3. Press the "Accept" softkey.
The "Starting Point" input window opens.
4. Enter the starting point of the contour.
X 90abs
5. Press the "Accept" softkey.
6. Enter the following contour elements and acknowledge using the "Accept"
softkey.
6.1. X 25abs
6.2. Y 115abs
6.3. X 15abs
6.4. Y 155abs
6.5. X 60abs
6.6. Y 135abs
7. Direction of rotation
8. R 25
9.1 Y 155abs
9.2 R 0
9.3 X 165abs
9.4 X 155abs
9.5 FS 0
9.6 X 140abs
10. Press the ">>" and "Close contour" softkeys, to close the contour.
11. Press the "Accept" softkey.
Y 25abs
FS 15
R 20
Y 135abs
R 10
R 15
R 20
X 110abs
R 15
Y 95abs
α1 240 De‐
grees
Y 25 abs
Operating Manual, 05/2017, A5E40868956
α1290 degreesR 0
R 28
α1225 degreesR 0
Milling