network or a power outlet of the rack socket strip (see also "PRIMECENTER Rack
l
System" assembly guide).
Figure 306: Connecting the Server to the Mains
Securing power cords
Figure 307: Securing power cord
Pull the cable clamp up (2).
l
Thread the power cord through the cable clamp (1).
l
Press the cable clamp down until it engages to secure the cable (3).
l
16.1.1 Hard Disk Drive
The hard disk drives which can be ordered for the ETERNUS CS800 server are supplied
already mounted in an installation frame so that defective hard disk drives can be
replaced during operation. The hard disk drive and installation frame together make up
the HDD module.
ETERNUS CS800
16.1 ETERNUS CS800 S6 Hardware
443