Fujitsu ETERNUS CS800 S6 User Manual page 232

LSUs
Max Connections
Active Connections
Backup Images
Optimized Duplication
Description
Click a column heading to sort the rows in the table by that column. Click the column
heading again to reverse the sort order.
The connections of a storage server that are used equals the data streams plus one
for each LSU polling. A backup job may generate more than one data stream if the
data can be read in parallel. For example, a policy that is backing up A, B, C, and D
drives of a Windows system can generate four data streams in parallel.
Adding a Storage Server
Add a storage server to present the storage capacity of the ETERNUS CS800 as LSUs that
are compatible with backup applications that support OST. You can add up to 100 storage
servers. When adding a storage server, you must also add an LSU to the storage server.
(For more information about LSUs, see
Data on storage servers is always deduplicated.
To add a storage server:
1. Click Add.
The Add Storage Server page displays (see
ETERNUS CS800
The number of LSUs that have been added to the storage
server.
The maximum number of connections allowed to the
storage server.
The number of currently active connections to the storage
server.
The number of backup images on the storage server.
The status of Concurrent Optimized Duplication for the
storage server (Enabled or Disabled), as well as the
configured targets (if any).
A brief description of the storage server (if available).
"LSU" on page
"Add Storage Server Page" on page
238.)
10.4 OST Configuration
233).
232