Fujitsu ETERNUS CS800 S6 User Manual page 123

Microsoft Internet Explorer 11
l
For correct operation of the remote management console, including the display of
the online help, disable any pop-up blockers and enable JavaScript in your Web
browser. In the Google Chrome browser, the help may not appear when Help is
selected. If this occurs, select Settings > Show Advanced Setting > Privacy > Pop-ups
> Manage Exceptions. Add the IP address to the exceptions box, select Allow, and
click Done.
Logging On to the ETERNUS CS800
1. Launch a supported Web browser on a workstation that has network access to the
ETERNUS CS800.
2. In the browser address box, type the IP address of the ETERNUS CS800, and then press
<Enter>.
The Login window displays (see
Figure 92: Login Window
If the Login window does not display, verify that the IP address is correct and that the
network path to the ETERNUS CS800 is valid. Also verify that you are using a supported
Web browser. Then try again. If you are still unable to access the Login window,
contact your ETERNUS CS800 administrator.
The default IP address is 10.1.1.1. The IP address can be changed during
installation using the Getting Started Wizard or at a later time on the Network
page (see
3. Select the login type and enter the corresponding password.
Monitor - Allowed to view information on the ETERNUS CS800 remote management
l
console but cannot make changes.
Administrator - Allowed to view and change information on the ETERNUS CS800
l
remote management console.
ETERNUS CS800
"Login Window" on page
"Network" on page 293).
7.2 Accessing Remote Management
123).
123