Fujitsu ETERNUS CS800 S6 User Manual page 429

Figure 302: Software Upgrade Utility - Software Image Uploaded
6. Read and follow the instructions in each of the pre-flight checks. The pre-flight checks
can differ depending on the type of upgrade, but typical checks include the following:
Delete all outstanding administration alerts (see
l
Close all outstanding service tickets (see
l
Stop all active backup jobs (see your backup application).
l
Make sure all replication jobs are complete or nearly complete (see
l
CS800 Replication Overview" on page
Make sure space reclamation is complete or nearly complete (see
l
Reclamation" on page
Download a system diagnostics file and transfer the file to a safe repository off the
l
ETERNUS CS800 (see
can help in resolving problems if they occur.
7. After you have completed all pre-flight checks, confirm that you are ready to continue
by selecting the Confirmation check box.
8. To begin the upgrade process, click Install.
Read the onscreen information to learn what to expect during the upgrade. The
bottom status bar displays installation progress, and a message displays if a reboot is
required. Depending on the type of upgrade, the ETERNUS CS800 may be placed in
service mode for about 30 minutes. While in service mode, the system will shut down
all backup and replication services. If necessary, the ETERNUS CS800 will restart after
the upgrade is complete.
The Install button is disabled if there are any outstanding administration alerts
or service tickets.
ETERNUS CS800
"Service Tickets" on page
340).
423).
"System Diag File" on page
14.6 Software Upgrades
"Admin Alerts" on page
408).
"ETERNUS
"Space
416). The system diagnostics file
407).
429