Fujitsu ETERNUS CS800 S6 User Manual page 368

Figure 255: Received Snapshots Page
Tasks
Use the Received Snapshots page to perform the following tasks:
View information about received snapshots (see
l
Recover a partition on the target system (see
l
Failback a partition to the source system (see
l
on page
Delete a received snapshot (see
l
The target system will retain up to 10 replication snapshots (default setting) for
each replicated partition. Once 10 snapshots have been saved, the oldest
snapshot is deleted to make room for each new snapshot that is received. (To
change the maximum number of snapshots retained for each partition, see
"Changing the Maximum Number of Snapshots" on page
Snapshots List
The Snapshots List displays all available snapshots that have been received from
configured replication sources. Snapshots are grouped by VTL partition. To see all
available snapshots for a partition, click the plus icon [+] next to the partition name.
The Snapshots List displays the following information about each snapshot:
Partition Name
Source System
ETERNUS CS800
370).
The name of the partition.
The hostname of the system that the snapshot was sent
from.
"Snapshots List" on page
"Recovering a Partition" on page
"Performing a Failback For a Partition"
"Deleting a Snapshot" on page
11.4 Receive VTL
368).
369).
372).
260).
368