Connecting The Servers To The Mains - Fujitsu ETERNUS CS800 S6 User Manual

Item Indicator
D Global Error
indicator (visible
through the
chassis
perforation)
ID indicator
(visible through
the chassis
perforation)
E CSS indicator
Table 4: Indicators on the I/O panel
For detailed information on the ETERNUS CS800 S6 see
3.1.3

Connecting the servers to the mains

The ETERNUS CS800 servers are equipped with two hot-plug power supply units. If one
power supply unit is defective, then the other guarantees unimpaired operation. Each hot-
plug power supply unit can be replaced during operation.
ETERNUS CS800
Status Description
yellow on A prefailure event has been detected that
requires (precautionary) service
intervention.
yellow flashing An error was detected that requires service
intervention.
off There is no critical event.
If the event is still acute after a power cycle,
the indicator is activated after the restart.
The indicator also lights up in standby
mode.
You can find more details on the indicated
errors in the System Event Log (SEL), in the
ServerView Operations Manager or via the
iRMC S4's Web interface.
blue on The system has been selected by pressing the
ID button in the front of the server. To
deactivate the indicator, press the button
again.
yellow on A prefailure event was detected for a CSS
component that you can fix yourself (for
reasons of precaution) with the CSS concept.
yellow flashing An error was detected that you can fix
yourself with the CSS concept.
off The system is OK.
If the event is still acute after a power cycle,
the indicator is activated after the restart.
PRIMERGY RX2540 M1 manual.
3.1 Server
47