Fujitsu ETERNUS CS800 S6 User Manual page 147

servers, configuring LSUs (logical storage units), and adding OST users. The wizard also
provides a link for downloading and installing the OST Plug-in on your backup host.
Additional Information
The OST Wizard is available in ETERNUS CS800 and Multi-Protocol configurations only.
l
If you plan to use Concurrent Optimized Duplication, you should complete the
l
Replication wizard before beginning the OST wizard (see
152).
You cannot use the OST wizard to edit existing storage servers or LSUs. For more
l
information about working with OST, see
To begin the OST wizard, on the Wizards menu, click OST.
Step 1: About
1. Read the information about the wizard (see
The About page displays the status of the OST service. OST settings can be configured
in Ready, Stopped, or Verifying state. The OST server is available for backup only in
Ready state.
2. Click Next to continue.
At any time while using the wizard, you can click Previous to return to the previous
step.
Figure 111: OST Wizard: About
Step 2: Add Storage Servers
1. Under Add Storage Server, enter information about the storage server (see
Wizard: Add Storage Servers" on page
ETERNUS CS800
"Replication Wizard" on page
"OST Configuration" on page
"OST Wizard: About" on page
149):
8.4 OST Wizard
227.
147).
"OST
147