Fujitsu ETERNUS CS800 S6 User Manual page 268

values for all slave devices in the bonded interface to calculate the overall outgoing
traffic rate.
The replication throttle bandwidth maximum is specified in KB/s or MB/s, so depending
l
on the statistic or report you are observing, you may need to convert the bandwidth
maximum to Kb/s or Mb/s in order to correctly compare it to the observed values.
Scheduling E-mail Reports
The ETERNUS CS800 can automatically generate a report with system status data or with
configuration data and send it to all configured e-mail recipients.
To enable the ETERNUS CS800 to send e-mail, you must specify an outgoing e-
mail server (see
more recipients (see
To configure a schedule for e-mail reports:
1. On the Scheduler page, add or edit an event in the Email Reports row (see
Editing a Scheduled Event" on page
2. In the Report Type drop-down box, select the type of e-mail report to schedule (Status
or Configuration).
3. (Optional) Specify when and how often the event reoccurs (see
a Scheduled Event" on page
4. Click Apply.
Scheduling Healthchecks
During healthchecks, the ETERNUS CS800 performs tests to verify the health and integrity
of the data deduplication blockpool. Schedule healthchecks regularly to make sure the
system is healthy and operating correctly. When you schedule healthchecks, only the
healthchecks that are currently enabled are run.
For more information about enabling healthchecks,
To configure a schedule for healthchecks:
1. On the Scheduler page, add or edit an event in the Healthchecks row (see
on page
2. Specify when and how often the event reoccurs (see
CAUTION!
For correct system operation, healthchecks must be run at regular intervals (at
least once a week).You can schedule healthchecks to occur daily or weekly but
not monthly or yearly. Also, recurrence is required.
3. Click Apply.
ETERNUS CS800
"Server" on page
"Email Reports" on page
269).
262).
276). In addition, you must specify one or
277).
264).
see"Healthchecks" on page
"Scheduler" on page
10.7 Scheduler
"Adding or
"Setting Recurrence for
417.
"Scheduler"
262).
268