The Remote Management Console - Fujitsu ETERNUS CS800 S6 User Manual

If the ETERNUS CS800 remote management console is idle for more than 30 minutes
(default setting), the system logs off the user. The inactivity timeout can be changed
on the Login Session page (see
There is no inactivity timeout for CLI Administrator logins over Secure Shell (SSH).
7.3

The Remote Management Console

After you log on to the ETERNUS CS800, the remote management console displays. The
remote management console includes the following features:
System Banner
The system banner displays at the top of the remote management console (see
Banner" on page
information at a glance, and to quickly access additional information. The system banner
also displays the time and date as well as the login type (administrator or monitor).
Figure 95: System Banner
The following items display on the system banner.
Item
Model Number
Status
ETERNUS CS800
"Login Session" on page
126). Use the system banner to see overall system status and alert
Description
The model number of the ETERNUS CS800.
Displays the operating state of the ETERNUS CS800:
Normal - (Green) The system is operating correctly.
l
Attention - (Yellow) There is a problem with the system.
l
The state displays Attention during a blockpool verify
operation (see
Verify Failure - (Red) The blockpool verify process has failed.
l
Low Space - (Yellow) Available disk space is low. Ingest and
l
replication continue, and space reclamation starts.
Critical Reserve Space - (Red) Available disk space is critically
l
low. Ingest and replication are stopped, and space reclamation
continues.
No Space - (Red) There is no available disk space. Ingest and
l
replication are stopped, and space reclamation continues.
Click the Status button to display detailed status information
l
about the system (see
7.3 The Remote Management Console
328).
"Blockpool Verify Behavior" on page
"Hardware" on page
"System
129).
381).
126