Eternus Dx100 S3 Base Module - Front View - Fujitsu ETERNUS CS800 S6 User Manual

Figure 33: Power supply unit (PSU) of the ETERNUS JX40 S2
Explanation
Inlet: This inlet is used to connect a power cord.
l
PSU switch: This switch is used to turn on and off the AC power supply.
l
LED name
POWER LED
FAULT LED
AC MISSING LED
FAN LED
Table 11: Status and meanings of each LED (power supply unit)
For detailed information on ETERNUS JX40 S2 storage module see
module manuals.
3.2.3

ETERNUS DX100 S3 Base Module - Front View

The Scale model of ETERNUS CS800 S6 uses ETERNUS DX100 S3 storage modules as backup
data storage. There are two variants of the ETERNUS DX100 S3 storage modules:
a storage base module (controller enclosure) which is connected to the server
l
component, and up to ten optional
ETERNUS CS800
LED status Description
green AC power is supplied to the power supply unit.
blinks green AC power is supplied to the power supply unit, but
DC power is not supplied to the storage subsystem.
amber AC power is not supplied to the power supply unit.
amber AC power is not supplied to this power supply unit,
but AC power is supplied to the other power supply
unit.
amber The power supply unit or the fan in the power
supply unit is in error status.
3.2 Storage Modules
ETERNUS JX40 storage
60