Fujitsu ETERNUS CS800 S6 User Manual page 290

Figure 199: AISConnect Proxy
2. Edit the required information (see Table 21 for a description of the fields).
3. Click Apply.
In order to set up the configuration of AISConnect you have to click Apply –even
if you do not use a Proxy. This action also starts the AISConnect service.
Field
Server
Port
Authentication Enabled
NTML Authentication Enabled Activate the checkbox if the HTTP proxy requires NTLM (NT
Username
Password
Country
Table 23: AISConnect Information
Control
Use the Control page to stop or start the AISConnect service.
ETERNUS CS800
Description
Enter the IP address of the HTTP proxy to be used to
contact the AIS server at the Fujitsu Service Centre.
Enter the port number of the HTTP proxy.
Activate the checkbox if the HTTP proxy requires
authentication.
LAN Manager) authentication.
Enter the user name for proxy authentication.
Enter the password for proxy authentication.
Select the country where your ETERNUS CS800 is located.
10.8 Notifications
290