Fujitsu ETERNUS CS800 S6 User Manual page 166

Step 1: About
1. Read the information about the wizard.
2. Click Next to continue.
At any time while using the wizard, you can click Previous to return to the previous
step.
Figure 126: Email Alerts Wizard: About
Step 2: Server
1. In the Hostname or IP Address box, enter the hostname or IP address of the outgoing
e-mail server (see
When entering IP addresses, never use an address that is in a reserved IP address
range.
To see a list of reserved IP address ranges, click the quick tip icon [?]located near
the IP address field.
To use hostname format, you must specify at least one DNS IP address on
the Network page (see
2. In the From Email Address box, enter the return e-mail address displayed in e-mails
sent by the ETERNUS CS800.
3. Specify a return address that lets you easily identify the system that generated the e-
mail (for example, systemname@any-domain.com). The return address must
contain an @ symbol and a valid domain name, including a period.
4. (Optional) Select the Enable Admin Alerts about Email Server not configured check
box to have system generate administration alerts to notify you if an e-mail server is
not configured.
5. (Recommended) Select the Enable automatic emails to Fujitsu Technology
Solutionscheck box to periodically send system configuration and status information
ETERNUS CS800
"Email Alerts Wizard: Server" on page
"Network" on page
167).
293).
8.7 Email Alerts Wizard
166