Fujitsu ETERNUS CS800 S6 User Manual page 276

Server
The Server page allows you to specify the server for outgoing e-mail. The ETERNUS CS800
cannot send e-mail notifications until you specify the outgoing e-mail server.
To access the Server page, on the Email page, click the Server tab (see
page 276).
Figure 188: Server Page
To specify the outgoing e-mail server:
1. In the Hostname or IP Address box, enter the hostname or IP address of the outgoing
e-mail server.
Additional Information
When entering IP addresses, never use an address that is in a reserved IP address
l
range. To see a list of reserved IP address ranges, click the quick tip icon [?]
located near the IP address field.
To use hostname format, you must specify at least one DNS IP address on the
l
Network page (see
2. In the From Email Address box, enter the return e-mail address displayed in e-mails
sent by the ETERNUS CS800.
Specify a return address that lets you easily identify the system that generated the e-
mail (for example, systemname@any-domain.com). The return address must
contain an @ symbol and a valid domain name, including a period.
3. (Optional) Select the Enable Admin Alerts about Email Server not configured check
box to have system generate administration alerts to notify you if an e-mail server is
not configured.
4. (Recommended) Select the Enable automatic emails to Fujitsu Technology
Solutionscheck box to periodically send system configuration and status information
ETERNUS CS800
"Network" on page 293).
10.8 Notifications
"Server Page" on
276