Scale - Fujitsu ETERNUS CS800 S6 User Manual

2.4.2

Scale

This version provides a midrange amount as well as fast network throughput and full data
storage facility. It includes the following features:
1 server unit with 2 CPUs (8 cores / 16 threads each) and 256GB RAM
l
Backup capacity between 32 and 352TB (ETERNUS DX100 S3 with optionally up to 10
l
expansion modules, field upgradeable).
3 x 1GbE ports for NFS and CIFS/SMB (to the customer LAN)
l
Optionally: 1 to 10 storage expansion modules, with 32TB usable capacity each.
l
Optionally: 4 x 10GbE (factory installed option/field upgradeable on special release
l
only)
Optionally: 8 x 1GbE (factory installed option)
l
Optionally: 4 x 8 or 16 GbFC (always factory installed)
l
Optionally: Hot Spares in ETERNUS DX100 S3 (factory enabled)
l
The 1st storage expansion shelf of the DX100 S3 will be equipped with 12 x Hot
l
Spare disks.
This will reduced the max. capacity to 320TB.
l
The Scale model uses an DX100 S3 storage array with large capacity, highly cost effective
Nearline SAS disks (Serial Attached SCSI). Twelve disks of 3.5'' size with a capacity of 4TB
each and a speed of 7,200 rpm are implemented to each module of the storage array.
Always six disks are building up a RAID 6 (4+2) disk group, i.e. there are two RAID 6
groups in each storage module. In addition, sixteen SAS disks of size 2.5" with a capacity
of 900GB each and a speed of 10,000 rpm are implemented in the server. Two disks are
reserved as hot spare, the other ones are used by the operating system and to store the
backup metadata.
ETERNUS CS800
2.4 Components ETERNUS CS800 S6 System
29