Fujitsu ETERNUS CS800 S6 User Manual page 376

Click the Information button [i] next to a partition to display detailed
information about the partition and recent replication activity.
Configuring a Target Partition for Cartridge Based Replication
Configuring a VTL partition for Cartridge Based Replication enables the automatic
replication of cartridges on the source partition to the target partition. Before you
configure a partition on the source system for Cartridge Based Replication, you must
configure a partition on the target system to receive the replicated data from the source
partition.
For information about configuring Cartridge Based Replication on the source
system, see
351.
To configure a target partition for Cartridge Based Replication:
1. Select the partition and click Edit.
The Edit Partition Settings page displays (see
376).
Figure 261: Edit Partition Settings Page
2. Select the Enable to receive Cartridge Based replication data check box to enable
Cartridge Based Replication for the partition.
Or clear the Enable to receive Cartridge Based replication data check box to disable
Cartridge Based Replication for the partition.
3. Enter a Sync ID in the box.
The Sync ID is used to identify the source partition that will send replicated data to the
target partition. The Sync ID must be identical to the Sync ID of the source partition on
the source system.
4. Select an Access option:
ETERNUS CS800
"Configuring Directory/File or Cartridge Based Replication" on page
"Edit Partition Settings Page" on page
11.4 Receive VTL
376