Eternus Dx100 S3 Expansion Modules - Rear View - Fujitsu ETERNUS CS800 S6 User Manual

ETERNUS DX100 S3 storage expansion modules are used in the ETERNUS CS800 S6 system
to provide additional capacity (backup data storage). Each storage expansion module
contains 12 3.5-inch NL-SAS hard disk drives in the front (in the same way as the storage
base module) and two I/O modules as well aspower supplies (with fans) in the rear.
Status and Meanings of Each LED
Figure 40: Front view of the DX100 S3 drive enclosure
Figure 41: Operation panel of DX100 S3 (drive enclosure)
LED name LED status Description
POWER
LED
FAULT LED amber
IDENTIFY
LED
Table 14: Status and Meanings of Each LED
3.2.6

ETERNUS DX100 S3 Expansion Modules - Rear View

This chapter describes the rear view of ETERNUS DX100 S3 storage expansion modules,
which includes connectors and indicators.
ETERNUS CS800
green DC power is supplied to the drive enclosure.
The drive enclosure is in error status.
blinks blue The installation location of the drive enclosure is identified
according to the instruction that is issued from ETERNUS Web GUI
or ETERNUS CLI.
3.2 Storage Modules
66