Fujitsu ETERNUS CS800 S6 User Manual page 67

Figure 42: Rear view of DX100 S3 drive enclosure
Figure 43: Rear view of DX100 S3 - I/O module
LED name
DI (IN) LINK
DI (IN) FAULT
DI (OUT) LINK
DI (OUT) FAULT
Ready
ETERNUS CS800
LED status Description
green The link between the DI (IN) port and the source port
has been established.
amber The ports to remove the mini SAS HD cables between
enclosures from are indicated. This occurs while a
drive enclosure is being added.
amber blinking The ports to connect the cables are indicated. This
occurs while a drive enclosure is being added.
green The link between the DI (OUT) port and the
destination port has been established.
amber The link between the DI (OUT) port and the
destination port is in error status.
amber blinking The ports to connect the cables are indicated. This
occurs while a drive enclosure is being added.
green The I/O module is in normal status.
3.2 Storage Modules
67