Network Setup Information; Figure 2.10 Drive Information Reference Window (When The Hard Address Is Set) - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.3 Library Information Display

Figure 2.10 Drive information reference window (When the Hard Address is set)

2.3.5

Network Setup Information

Network setup information can be referenced.
Procedure
1
Click the [Network] button from the INFORMATION menu.
INFORMATION menu
+Network
2
The following setup address information about the network is displayed:
■ IPv4
• IPv4 Enable/Disable
When IPv4 is enabled, the following items and addresses are also displayed:
• DHCP Enable/Disable
• IP Address
• Subnet Mask
• Gateway
• NTP Server Address
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
34
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0