Fujitsu ETERNUS CS800 S6 User Manual page 281

IP Address
Name
Selected Traps
Adding a Destination
Add an SNMP destination to send traps from the ETERNUS CS800 to the destination.
You can add up to 5 destinations.
To add a destination:
1. Click Add.
The Add Trap Destination page displays (see
281).
Figure 193: Add Trap Destination Page
2. Enter information about the destination:
ETERNUS CS800
The IP address of the destination.
The name of the destination.
The traps the ETERNUS CS800 sends to the destination
(Failure, Warning, Informational, Available, or
Unavailable).
"Add Trap Destination Page" on page
10.8 Notifications
281