Fujitsu ETERNUS CS800 S6 User Manual page 385

Status
The Fibre Channel Controller section displays the following information about the ports in
the selected Fibre Channel or SAS controller:
Component
Value
Status
Network Ports
The Network Ports page allows you to view information about Ethernet ports in the
system. The ETERNUS CS800 includes three or more Ethernet ports (depending on the
configuration).
To access the Network Ports page, on the Details page, click the Network Ports tab (see
"Network Ports Page" on page
Figure 268: Network Ports Page
The Network Ports page displays the following information:
Component
ETERNUS CS800
The status of the Fibre Channel card.
Normal - (Green) The component is operating
l
correctly.
Attention - (Yellow) There is a problem with the
l
component.
Failed - (Red) The component has failed.
l
The number of the Fibre Channel port.
The throughput capacity of the port (if connected).
The status of the port.
Up - (Green) The port is connected.
l
Down - (Green) The port is not connected.
l
385).
The number of Ethernet port.
12.2 Hardware
385