Fujitsu ETERNUS CS800 S6 User Manual page 81

5.2 Installing the components in the rack
Position the support bracket at the corresponding height on the rear left support upright,
(place knob in the corresponding hole and secure it as described in the technical manual
for the rack in question.
Release the rails
Figure 52: Removing the Outer Telescopic Rail
Start with the left rail. To release the locking mechanism press the rear side of the toothed
levers together (1) and pull the hook simultaneously as far as it will go (2). If the toothed
levers are difficult to access you can use the unlocking tool to release it (see delivery
pack). Put the unlocking tool into the holes of the toothed levers. Press the toothed levers
together in the direction of arrow and pull simultaneously the hook as far as it will go.
ETERNUS CS800 81