To register the ETERNUS CS800 system with the Fujitsu Support Centre, please place a
service request at the Fujitsu Service Desk
http://ts.fujitsu.com/support/servicedesk.html
For more information about AIS Connect, see
To begin the AISConnect wizard, on the Wizards menu, click AIS Connect.
Step 1: About
1. Read the information about the wizard (see the Figure below).
2. Click Next to continue.
At any time while using the wizard, you can click Previous to return to the
previous step.
Figure 130: AISConnect Wizard: About
Step 2: Proxy
If your network environment requires use of a proxy server, you must specify the proxy
server settings to enable AISConnect.
1. Enter the proxy server information:
ETERNUS CS800
Server - Enter the IP address of the proxy server.
l
Port - Enter the port number of the proxy server.
l
Authentication Enabled - Select the check box if the proxy server requires
l
authentication.
NTLM Authentication Enabled - Select the check box if the proxy server
l
requires NTLM (NT LAN Manager) authentication.
Username - Enter the username to use for proxy authentication.
l
"AIS Connect" on page
8.8 AIS Connect
289.
171