Fujitsu ETERNUS CS800 S6 User Manual page 265

You can also right-click an existing event to see options for editing an event.
Figure 184: Adding a New Event
2. Define the start and, if applicable, the end of the event.
Specify the Start Date and Start Time using the pop-up calendar and drop-down
l
box.
(Replication throttle events only) Specify the End Date and End Time. The end
l
date and time must occur after the start date and time.
For a new event, you can click and drag to adjust the start and end time. For
an existing event, you can drag the event to change when it occurs. You can
also drag the left or right edge of the event to adjust the start or end time.
3. Enter a brief description of the event in the Description box. (This description will
display on the schedule view.)
4. Specify options specific to the type of event. See the following sections:
"Scheduling a Share or Partition for Replication" on page 266
l
"Scheduling Replication Throttling" on page 266
l
"Scheduling E-mail Reports" on page 268
l
"Scheduling Healthchecks" on page 268
l
"Scheduling Space Reclamation" on page 269
l
5. (Required for healthchecks and space reclamation) Specify when and how often the
event reoccurs (see
6. Click Apply.
7. Refresh the browser window to make sure the event settings are applied.
ETERNUS CS800
"Setting Recurrence for a Scheduled Event" on page
10.7 Scheduler
269).
265