Entry - Fujitsu ETERNUS CS800 S6 User Manual

The following versions of the ETERNUS CS800 S6 are provided:
"Entry" on page 28
l
"Scale" on page 29
l
2.4.1

Entry

This version provides a base amount of network throughput and data storage facility. It
includes the following features:
Server unit with
l
either 1 CPU (6 cores / 12 threads) and 128GB RAM to provide a backup capacity
o
between 8 and 24TB
or 2 CPU's (6 cores / 12 threads each) and 256GB RAM to provide a backup
o
capacity between 8 and 120TB
5 x 1GbE ports for NFS and CIFS/SMB (to the customer LAN)
l
Optionally with the two-CPU model: Up to three JX40 S2 storage modules, providing
l
16, 32, 48, 64, 80 or 96TB of additional disk capacity (field upgradeable option)
Optionally: 2 x 8 or 16Gb Fibre Channel ports (factory installed option)
l
Optionally: 2 x 10GbE (factory installed option/field upgradeable on special release
l
only)
With the Entry model, either 4x2.5" 600GB (one-CPU model) or 6x2.5 900GB (two-CPU
model) SAS hard disk (10,000 rpm) are building up RAID 1 disk groups used for the
operating system and backup metadata. Further 6 or 12 or 18 × 2.5" 2TB SATA hard disks
(7,200 rpm) are building up RAID 6 (4+2) disk groups used as the backup storage with a
capacity of 8TB, 16TB or 24TB.
The two-CPU Entry model with an entire capacity of more than 24TB uses up to three
ETERNUS JX40 S2 storage modules with either 6 or 12 x 3.5" 2TB SATA hard disks (7,200
rpm) per JX40 building up one to six additional RAID 6 (4+2) disk groups for backup data.
Figure 2: Front View of an Entry System (Example)
ETERNUS CS800
2.4 Components ETERNUS CS800 S6 System
28