Hdd Removal And Replacement Procedures - Fujitsu ETERNUS CS800 S6 User Manual

Figure 308: 2.5-inch HDD Numbering

16.1.2 HDD Removal and Replacement Procedures

Removing
1. Release the locking mechanism by pressing the locking button (1).
2. Push the handle of the HDD module fully in the direction of the arrow (2).
The HDD module is now unlocked.
3. Wait about 30 seconds to allow the hard disk drive to spin down.
4. Pull the HDD module completely out of its bay (see the figures below).
Figure 309: Disconnecting a 2.5-inch HDD
ETERNUS CS800
16.1 ETERNUS CS800 S6 Hardware
445