Fujitsu ETERNUS CS800 S6 User Manual page 210

If you are editing a partition, only the Library Model, Number of Storage
Slots, and Number of Virtual Tape Drives options can be changed.
Library Model
Number of Storage
Slots
Number of Virtual
Tape Drives
4. (Optional) Under Replication Settings, specify replication settings.
For more information about configuring replication for a partition, or to set up
replication for the partition at a later time, see
5. Click Apply.
6. Click Online to return the partition to an online state.
Deleting a VTL Partition
Delete a VTL partition if it is no longer needed. When you delete a partition, all data
stored on the partition is lost.
If you delete a partition configured for Cartridge Based Replication on the source
ETERNUS CS800, the partition is not automatically deleted on the target ETERNUS
CS800. If you do not want to retain the partition on the target ETERNUS CS800,
you can manually delete it.
To delete a VTL partition:
1. If the partition is online, select the partition and click Offline to take the partition
offline. To delete a partition, it must be offline.
ETERNUS CS800
Select the library model emulated by the partition. The library
model determines the inquiry string returned to the host by
the ETERNUS CS800.
The following library models are available:
Models
Fujitsu CS-TL
l
ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar i500
l
ADIC Pathlight VX
l
Enter the number of storage slots in the partition (up to
9,000).
One I/E slot is created for each storage slot up to a
maximum of 240 I/E slots.
Enter the number of virtual tape drives in the partition.
If all tape drives are currently assigned to other
partitions, you must remove one or more tape drives
from an existing partition to make them available for
use in a new partition.
"Replication" on page
10.3 VTL Configuration
340.
210