Fujitsu ETERNUS CS800 S6 User Manual page 71

3.5"hard drive carriers
3.5" hard drive carriers are used in the storage modules. There are two LED indicators for
each hard drive carrier (see the figure below).
Figure 46: 3.5" Hard Drive Carrier
Item Colour Description
1 green HDD BUSY
2 orange HDD FAULT
Table 18: 3.5" Hard Drive Disk Indicator
If a drive fails, you will be notified by an admin alert in the remote management
pages (see
ETERNUS CS800
Lights up: HDD in active phase
l
Does not light: HDD inactive (drive inactive)
l
Does not light: no HDD error
l
Lights up: HDD faulty or rebuild stopped (drive defective/needs
l
replacing, a rebuild process was stopped or the HDD module is not
correctly inserted)
"Admin Alerts" on page 407).
3.3 Hard Drive Carrier
71