Fujitsu ETERNUS CS800 S6 User Manual page 311

Enable or disable CLI access for the administrator or viewer account (see
l
Accounts" on page
Enable or disable GUI access for the service account (see
l
Account" on page
Enable or disable SSH access for the service account ( see
l
Account" on page
Changing GUI Administrator Password
Use the GUI password when logging onto the remote management console as an
administrator (see
1. Under GUI Administrator, enter the following information:
Old Password
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special
l
characters are allowed.
Loss of this password will require Fujitsu Technology Solutions service support.
l
2. Click Apply.
Enabling GUI Monitor Account
Use the GUI password when logging onto the remote management console as a monitor
(see "Accessing Remote Management" on page
1. Under GUI Monitor do one of the following steps:
Select the Enable GUI Monitor Login check box to enable the GUI monitor account.
l
Clear the Enable GUI Monitor Login check box to disable the GUI monitor account.
l
2. Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters
are allowed.
3. Click Apply.
Enabling CLI Accounts
The CLI accounts provide access to the ETERNUS CS800 command line interface as an
administrator or monitor.
ETERNUS CS800
311).
315).
316)
"Accessing Remote Management" on page
Enter the old password.
Enter the new password.
Enter the new password again to confirm it.
Enter the new password.
Enter the new password again to confirm it.
"Enabling GUI Service
"Enabling SSH/CLI Service
122).
122).
10.9 System
"Enabling CLI
311