Connecting The Notebook With The Server - Fujitsu ETERNUS CS800 S6 User Manual

Information on Background Initialize is displayed under the Status menu item of the
ETERNUS CS800 Web GUI (Status > Hardware > Details > Storage Arrays), see chapter
"Accessing Remote Management" on page 122
system management pages and chapter
about the Status page.
6.2

Connecting the Notebook with the Server

Proceed as follows:
1. Using an Ethernet cable, connect the Ethernet port of the notebook to the service port
(the right onboard port labeled "0").
Figure 75: Connecting server with the notebook
2. Configure the network settings on the notebook.
This procedure assumes you are running Windows 7, 8.x or 10 on the
computer. The steps might be different if you are using another operating
system.
a. Type network and sharing into the Search box in the Start Menu and select
Network and Sharing Center when it comes up. When Network and Sharing Center
opens, click on Change adapter settings.
b. Right-click the network connection that corresponds to the Ethernet port you have
connected to the server (for example, Local Area Connection), and click Properties.
c. Select Internet Protocol (TCP/IP) in the list of connections, then click Properties.
The Internet Protocol (TCP/IP) Properties window displays.
ETERNUS CS800
6.2 Connecting the Notebook with the Server
for information about how to access the
"Status" on page 381 for detailed information
101