Ipv6 Pim Bsr-Boundary; Ipv6 Pim Dm - HP 6125XLG Command Reference Manual

ipv6 pim bsr-boundary

Use ipv6 pim bsr-boundary to configure an IPv6 PIM domain border (a bootstrap message boundary).
Use ipv6 pim bsr-boundary to remove the configured IPv6 PIM domain border.
Syntax
ipv6 pim bsr-boundary
undo ipv6 pim bsr-boundary
Default
No PIM domain border is configured.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure VLAN-interface 100 as a PIM domain border.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim bsr-boundary
Related commands
c-bsr (IPv6 PIM view)
•
ipv6 multicast boundary
•

ipv6 pim dm

Use ipv6 pim dm to enable IPv6 PIM-DM.
Use undo ipv6 pim dm to disable IPv6 PIM-DM.
Syntax
ipv6 pim dm
undo ipv6 pim dm
Default
IPv6 PIM-DM is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
166