Ordering - GE L60 Instruction Manual

2.1 INTRODUCTION
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
Disconnect Switches
DNP 3.0 or IEC 60870-5-104 Communications
Event Recorder
Fault Location
2
Fault Reporting
FlexElements™ (8)
FlexLogic™ Equations
Line Pickup
Load Encroachment
Metering: Current, Voltage, Power, Frequency
The L60 is available as a 19-inch rack horizontal mount unit or a reduced size (¾) vertical mount unit, and consists of the
following modules: CPU, faceplate, power supply, CPU, CTs and VTs, digital input and outputs, transducer inputs and out-
puts, and inter-relay communications. Each of these modules can be supplied in a number of configurations specified at the
time of ordering. The information required to completely specify the relay is provided in the following tables (see chapter 3
for additional details of relay modules).
The L60 is specified with two CT/VT modules (8F and 8P). When the L60 is applied in two-breaker configurations (such as
breaker-and-a-half or ring configurations), the currents from the two CTs are summed internally within the relay or exter-
nally. If the voltage is not supplies to the relay, some functions (such as distance, undervoltage, and synchrocheck) will not
be available.
Order codes are subject to change without notice. CPU modules 9G, 9H, 9L, and 9M are obsolete. See
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order codes for the horizontal mount units are shown below.
Table 2–3: L60 ORDER CODES (HORIZONTAL UNITS)
L60 - * ** - *
BASE UNIT L60 | |
CPU E |
J |
K |
N |
S |
SOFTWARE 00
03
MOUNT/COATING
FACEPLATE/ DISPLAY
2-4
FUNCTION
Transducer Inputs/Outputs
Trip Bus
User Definable Display
User Programmable LEDs
User Programmable Pushbuttons
User Programmable Self-Tests
Virtual Inputs (64)
Virtual Outputs (96)
VT Fuse Failure
* * - F ** - H ** - L ** - N
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
H | | | | |
A | | | | |
C | | | |
D | | | |
R | | | |
A | | | |
P | | | |
G | | | |
S | | | |
B | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
W | | | |
Y | | | |
L60 Line Phase Comparison System
for the latest ordering options.
** - S ** - U ** - W/X ** For Full Sized Horizontal Mount
| | | | Base Unit
| | | | RS485 and RS485
| | | | RS485, multi-mode ST 100Base-FX and 10/100Base-T
| | | | RS485, multi-mode ST redundant 100Base-FX and 10/100Base-T
| | | | RS485 and 10/100Base-T
| | | | RS485 and six-port managed Ethernet communications
| | | | No software options
| | | | IEC 61850; not available for Type E CPUs
| | | | Horizontal (19" rack)
| | | | Horizontal (19" rack) with harsh environmental coating
| | | | English display
| | | | French display
| | | | Russian display
| | | | Chinese display
| | | | English display with 4 small and 12 large programmable pushbuttons
| | | | French display with 4 small and 12 large programmable pushbuttons
| | | | Russian display with 4 small and 12 large programmable pushbuttons
| | | | Chinese display with 4 small and 12 large programmable pushbuttons
| | | | Enhanced front panel with English display
| | | | Enhanced front panel with French display
| | | | Enhanced front panel with Russian display
| | | | Enhanced front panel with Chinese display
| | | | Enhanced front panel with English display and user-programmable pushbuttons
| | | | Enhanced front panel with French display and user-programmable pushbuttons
| | | | Enhanced front panel with Russian display and user-programmable pushbuttons
| | | | Enhanced front panel with Chinese display and user-programmable pushbuttons
| | | | Enhanced front panel with Turkish display
| | | | Enhanced front panel with Turkish display and user-programmable pushbuttons
2 PRODUCT DESCRIPTION

2.1.2 ORDERING

GE Multilin