GE L60 Instruction Manual page 188

5.2 PRODUCT SETUP
The control pushbuttons become user-programmable only if the breaker control feature is not configured for manual control
via the USER 1 through 3 pushbuttons as shown below. If configured for manual control, breaker control typically uses the
larger, optional user-programmable pushbuttons, making the control pushbuttons available for other user applications.
5
5-50
SETTING
CONTROL PUSHBUTTON
{
1 FUNCTION:
Enabled=1
SETTINGS
SYSTEM SETUP/
BREAKERS/BREAKER 1/
BREAKER 1 PUSHBUTTON
CONTROL :
AND RUN
Enabled=1
OFF
SYSTEM SETUP/
BREAKERS/BREAKER 2/
ON
BREAKER 2 PUSHBUTTON
CONTROL :
Enabled=1
Figure 5–6: CONTROL PUSHBUTTON LOGIC
L60 Line Phase Comparison System
TIMER
FLEXLOGIC OPERAND
0
CONTROL PUSHBTN 1 ON
100 msec
842010A2.CDR
5 SETTINGS
GE Multilin