GE L60 Instruction Manual page 105

Line phase comparison system, ur series
Hide thumbs Also See for L60:
Table of Contents

Advertisement

3 HARDWARE
The system will request the name and destination path for the settings file.
3.
Enter an appropriate folder and file name and click Save.
All settings files will be saved as text files and the corresponding file extension automatically assigned.
c) UPLOADING ETHERNET SWITCH SETTINGS FILES TO THE MODULE
The following procedure describes how to upload local settings files to the Ethernet switch module. It is highly recom-
mended that the current settings are saved to a settings file before uploading a new settings file.
It is highly recommended to place the switch offline while transferring setting files to the switch. When transferring
settings files from one switch to another, the user must reconfigure the IP address.
NOTE
1.
Select the desired device from site tree in the online window.
2.
Select the Settings > Product Setup > Communications > Ethernet Switch > Ethernet Switch Settings File >
Transfer Settings File item from the device settings tree.
The system will request the name and destination path for the settings file.
3.
Navigate to the folder containing the Ethernet switch settings file, select the file, then click Open.
The settings file will be transferred to the Ethernet switch and the settings uploaded to the device.
GE Multilin
3.4 MANAGED ETHERNET SWITCH MODULES
L60 Line Phase Comparison System
3
3-53

Advertisement

Table of Contents
loading

Table of Contents