Setting Ais Display Target; Setting Ais Destination Ship (Directrak Tm ) - JRC JMA-3300 Series Instruction Manual

Chapter 2 OPERATIONS
2.15 SETTING TT/AIS

2.15.6 SETTING AIS DISPLAY TARGET

Set the number of AIS display targets.
Set this to get a better look at the screen by limiting the number of AIS symbols.
Setting AIS Display Target
1 Open
20 :
30 :
40 :
50 :
2.15.7 SETTING AIS DESTINATION SHIP (DirecTrak
AIS destination ship is the function to display the user-specified ship as the destination.
If MMSI of AIS target is set, the destination ship can be specified.
Setting AIS Destination Ship
1 Open
Turn the [MULTI] control to set MMSI.
MMSI can be adjusted between 0 and 999999999.
2-128
Target - AIS Display Target .
The number of AIS display targets is set to 20.
The number of AIS display targets is set to 30.
The number of AIS display targets is set to 40.
The number of AIS display targets is set to 50.
Target - AIS Destination Ship .
TM
)