<Processing unit editing screen>
To start continuous measurement, click the continuous measurement button (
If you wish to stop continuous measurement, click the continuous measurement stop button (
The settings data cannot be edited during continuous measurement.
6-1-2
Measuring File Images in the RAMDisk or the External Memory,
i.e. USB Memory of the Vision Sensor
Select the measurement target file and click the [Measure] button.
Select the file as described below.
1
Click the [File] button.
2
Click the file selection button (
3
Click the [Measure] button.
To start continuous measurement, click the continuous measurement button (
If you wish to stop continuous measurement, click the continuous measurement stop button (
The settings data cannot be edited during continuous measurement.
6-1-3
Measuring Logging Images in the Vision Sensor Memory
Select the measurement target logging image and click the [Measure] button.
Select the file as described below.
1
Click the [Logging image] button.
2
Click the [Measure] button.
If you wish to change the measurement target logging image, click the button for measuring the previ-
ous image (
) or click the button for measuring the next image (
To start continuous measurement, click the continuous measurement button (
If you wish to stop continuous measurement, click the continuous measurement stop button (
The settings data cannot be edited during continuous measurement.
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
) and then select the target file.
6 Online Debugging
).
).
).
).
).
6
).
).
6 - 3