Connecting The Flowcheck Sensor - Weinmann MEDUMAT Standard2 Instructions For Use Manual

7. If necessary: Attach the patient hose system with Velcro strap
with clip to the patient's clothing.
Result The patient hose system is connected and ready for use.

4.4.4 Connecting the FlowCheck sensor

The FlowCheck sensor enables flow measurement (only with flow
measurement + ASB option).
1. Connect the connector of one of the following connection
lines to the accessory connection on the device:
• FlowCheck sensor connection line
• FlowCheck sensor connection line with MEDUtrigger
4 Preparation and operation
MEDUMAT Standard
2
EN 55