Following the selection of the RSI mode, the device launches the
oxygen demand function immediately for the preoxygenation of a
spontaneously breathing patient.
For intubation, switch to the Manual function. The I:E ratio is
always 1:1. With the MEDUtrigger supplied, this function now
enables manual ventilation with a defined volume and a defined
pressure limitation. The Manual function can be used for checking
the position of the tube or as a fallback option should it prove
difficult to secure the airway.
Air Mix cannot be activated in the Demand and Manual functions.
Following successful airway management, switch to continuous
ventilation mode with the Contin. function. The device
automatically switches to one of the following modes with the
ventilation parameters preset for the patient group
"14.1.9 Factory settings for emergency modes and ventilation
modes",
page 234):
•
IPPV
•
BiLevel + ASB (only if the BiLevel + ASB option is activated).
If the capnography option is activated, you can set a pressure
gauge view or curve view in CPR mode
patient", page 128)
7.4.3 Demand mode
Description
Abbreviation
Long form
Type
Requirement
Ventilation parameters
Left-hand navigation knob
Central navigation knob
Right-hand navigation knob
7 Description of the modes
(see "6.3.8 Presets
-
Demand
Pressure-controlled
Demand option is activated
-
-
•
pMax
•
Emergency mode
MEDUMAT Standard
(see
2
EN
159