Replacing Cpr Mode; Performing Ventilation In Rsi Mode - Weinmann MEDUMAT Standard2 Instructions For Use Manual

4 Preparation and operation

4.7.12 Replacing CPR mode

Requirement
Result

4.7.13 Performing ventilation in RSI mode

Requirement
84 EN MEDUMAT Standard
• The device is switched on.
• The CCSV option is activated.
• The CPR mode is set.
• Continuous ventilation
1. To change the mode, switch between the CCSV and IPPV
fields using the right navigation knob.
The ventilation mode in CPR mode has been changed.
• The device is switched on.
• The MEDUtrigger is connected to the device.
• RSI was set as the ventilation mode for a new patient
"4.7.3 Selecting a ventilation mode for a new patient",
page 70). The Demand function is automatically activated.
2
is activated.
(see