Connecting Medutrigger - Weinmann MEDUMAT Standard2 Instructions For Use Manual

5. With disposable hose systems: Connect the CO
hose to the elbow with Luer lock connector.
To minimize the dead space, you can also connect the CO
measuring hose to a breathing system filter with Luer lock
connector (e.g., WM 22162).
6. With the reusable hose system: Guide the CO
with the rest of the measuring hose system and ventilation
hose into the hose protection sleeve of the patient hose
system.
7. If necessary: Activate the capnography option
"6.3.9 Options",
Result The CO measuring hose is connected to the patient hose system.
2

4.4.6 Connecting MEDUtrigger

The operational readiness of MEDUtrigger is indicated by 2 green
LEDs on MEDUtrigger. If MEDUtrigger is connected to the device
and the green LEDs on MEDUtrigger are lit, you can trigger
mechanical breaths manually by pressing the MEDUtrigger button.
4 Preparation and operation
page 134).
MEDUMAT Standard
measuring
2
2
measuring hose
2
(see
2
EN 59